Filter
Top Products
87
Troubleshooting
You cannot delete images stored on
or format the “Memory Stick Duo.”
• Release the lock on the write-protect tab of
the “Memory Stick Duo” if there is one
(p. 100).
• The maximum number of images that you
can delete on the index screen at one time is
100.
• You cannot delete the images protected on
another device.
The data file name is not indicated
correctly or flashes.
• The file is damaged.
• The file format is not supported by your
camcorder (p. 99).
Refer also to “Memory Stick Duo” (p. 86).
Pressing START/STOP or PHOTO
does not record images.
• The playback screen is displayed. Set the
POWER switch to (Movie) or
(Still) (p. 28).
• Your camcorder is recording the image you
have just shot on the hard disk. You cannot
make new recording during this period.
• The hard disk of the camcorder is full.
Delete unnecessary images (p. 46).
• Total number of movie scenes or still
images exceeds the recordable capacity of
your camcorder (p. 11). Delete unnecessary
images (p. 46).
• While [DROP SENSOR] activates (p.75),
you may not record movies/still images.
• The temperature of your camcorder is
extremely high. Turn off your camcorder
and leave it for a while in a cool place.
• The temperature of your camcorder is
extremely low. Turn off your camcorder
and take it to a warm place. Leave the
camcorder there for a while, then turn on
the camcorder.
You cannot record a still image.
• The playback screen is displayed. Set your
camcorder to recording standby (p. 28).
• You can capture up to 3 still images only
during movie recording.
• The “Memory Stick Duo” has run out of
space. Use a new “Memory Stick Duo” or
format the “Memory Stick Duo” (p. 58). Or
delete the unnecessary images (p. 47).
• You cannot record a still image together
with:
– [SMTH SLW REC]
– [FADER]
– [D.EFFECT]
– [PICT.EFFECT]
The ACCESS lamp remains lit or
flashing even when you stop
recording.
• Your camcorder is recording the scene you
have just shot on the hard disk.
The recording angle looks different.
• The recording angle may look different
depending on the condition of your
camcorder. This is not a malfunction.
The flash does not work.
• You cannot record with the flash with:
–Capturing still images while shooting a
movie
–If a conversion lens (optional) is attached
• Even if auto flash or (Auto redeye
reduction) is selected, you cannot use the
internal flash with:
–NightShot
–[SUPER NIGHTSHOT]
–[TWILIGHT], [CANDLE],
[SUNRISE&SUNSET], [FIREWORKS],
[LANDSCAPE], [SPOTLIGHT],
[BEACH] or [SNOW] in [SCENE
SELECTION]
–[MANUAL] in [EXPOSURE]
–[SPOT METER]
Recording