37
Table of Contents Enjoy Useful Functions Index
GB
Notes
The subject you touched may not be detected,
depending on the surrounding brightness or
hairstyle of the subject. In this case, touch the
subject again when you record.
If you want to track a face, set the [Face
Detection] setting to other than [Off] ([Auto] is
the default setting).
Tips
The double-lined frame around a face targeted
for possible smile detection shot turns orange.
If the face you touched disappears from the
LCD screen, the subject selected in [Face
D
etec
tion] (p. 72) has priority. If the face you
touched returns to the screen, that face has
priority.
Capturing smiles automatically
(Smile Shutter)
A photo is recorded automatically when
the camcorder detects the smile of a person
during movie recording ([Dual Capture]
is the default setting) (page 72). An orange
frame appears around a face targeted for
possible smile detection shot.
Notes
When the frame rate and the recording mode
are set to [50i]/[Highest Quality
] or
[50p]/[50p Quality
], you cannot use the
Smile Shutter function while recording movies.
Smiles may not be detected depending on
recording conditions, subject conditions, and
the setting of your camcorder.
Tips
You can select the subject that has priority
for face detection and smile detection with
[F
ace Dete
ction] (p. 72). When you specify the
priority subject by touching the detection frame
on the LCD screen, the face with a double-lined
frame has priority.
If a smile is not detected, set [Smile Sensitivity]
(p
. 73).
Recording high quality photos
during movie recording (Dual Rec)
You can record photos during movie
recording by pressing PHOTO.
Notes
may appear when the capacity of the
recording media is not enough or when you
record photos continuously. You cannot record
photos while
is displayed.
Depending on the [
REC Mode] or
[
Frame Rate] selected, appears on the
LCD screen and you may not be able to use the
Dual Rec function.
Tips
When the MODE lamp is set to
(Movie),
the size of photos becomes [3.0M] (16:9) or
[2.2M] (4:3).
You can record photos during recording
standby in the same way as when the
(Photo)
lamp is turned on.