74
US
FOCUS
You can adjust the focus manually. You can
select this function also when you want to
focus on a certain subject intentionally.
Touch (nearby subject)/ (distant
subject) to adjust the focus.
To adjust the focus automatically, touch
[AUTO].
Notes
When you set [FOCUS] to [MANUAL],
appears.
The minimum possible distance between
camcorder and subject while maintaining sharp
f
ocus is about 1 cm (about 13/32 in.) for wide
angle and about 80 cm (about 31 1/2 in.) for
telephoto.
Tips
appears when the focus cannot be adjusted
any closer, and
appears when the focus
cannot be adjusted farther away.
It is easier to focus on the subject by moving
the power zoom lever towards T (telephoto) to
adjust the focus, then towards W (wide angle)
to adjust the zoom for recording. When you
want to record a subject at close range, move
the power zoom lever to W (wide angle), then
adjust the focus.
The focal distance information (distance at
which the subject is focused on; used as a guide
if it is dark and focus adjustment is difficult)
appears for a few seconds in the following cases.
(This information will not display correctly if a
conversion lens (sold separately) is being used.)
When the focus mode is switched from
automatic to manual
When you set focus manually
You can also adjust manually by using the
MANU
AL dial (p. 31).
TELE MACRO
This is useful to shoot small subjects, such
as flowers or insects. You can blur out
backgrounds and the subject stands out
clearer.
OFF
Cancels TELE MACRO. (TELE MACRO is
also canceled when you move the zoom lever
to the W side.)
ON ( )
The zoom (p. 26) moves to the top of the T
(telephoto) side automatically and allows
recording subjects at a close distance down to
a
bout 32 cm (12 5/8 in.).
Notes
When recording a distant subject, focusing may
be difficult and can take some time.
A
djust the focus manually ([FOCUS], p. 74)
when it is hard to focus automatically.
AE SHIFT
You can adjust the exposure manually.
OFF
Adjusts the exposure automatically.
ON ( and the adjustment value)
Adjusts the exposure manually.
Tips
You can adjust the automatic exposure level to
brighter or darker when [EXPOSURE] is set to
[AUTO].
Touch
if the subject is white or the
backlight is bright, or touch
if the subject
is black or the light is dim.