Filter
Top Products
93
Additional information
US
The remaining battery time indicator does
not indicate the correct time.
The ambient temperature is too high or too
low. This is not a malfunction.
The battery pack has not been charged
enough. Fully charge the battery again. If the
problem persists, replace the battery pack with
a n
ew one (p. 113).
The indicated time may not be correct
depending on the environment of use.
The battery pack is quickly discharged.
The ambient temperature is too high or low.
This is not a malfunction.
The battery pack has not been charged
enough. Fully charge the battery again. If the
problem persists, replace the battery pack with
a n
ew one (p. 113).
LCD screen/viewfinder
Menu items are grayed out.
You cannot select grayed items in the current
recording/playback situation.
There are some functions you cannot activate
sim
ultaneously (p. 98).
The buttons do not appear on the touch
panel.
Touch the LCD screen lightly.
Press DISPLAY on the Wireless Remote
C
ommander (p. 123).
The buttons on the touch panel do not
work correctly or do not work at all.
Adjust the touch panel ([CALIBRATION])
(p. 115).
The buttons on the touch panel quickly
disappear.
Set [DISPLAY SET] to [ON] (p. 87).
The image in the viewfinder is not clear.
Move the viewfinder lens adjustment lever
until the image appears clearly (p. 23).
The image in the viewfinder has
disappeared.
Close the LCD panel. Even if the viewfinder
is pulled out, no image is displayed in the
viewfinder when the LCD panel is open
(p
. 16).
Memory card
Operations using the memory card
cannot be performed.
If you use the memory card formatted on a
computer, format it again on your camcorder
(p
. 85).
Images stored on the memory card
cannot be deleted.
The maximum number of images that you can
delete on the index screen at one time is 100.
You cannot delete the protected images.
The data file name is not indicated
correctly or flashes.
The file is damaged.
The file format is not supported by your
c
amcorder (p. 112).
Recording
Refer also to “Memory card” (p. 93).
Pressing START/STOP or PHOTO does not
record images.
The playback screen is displayed. Press MODE
to turn on the
(Movie) or (Photo) lamp
(p. 21).
Your camcorder is recording the image you
have just shot on the recording media. You