Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording 4-67
5 DC IN/battery indicator
This shows the battery voltage of an internal battery pack or an external
battery connected to the DC IN connector.
When the power is supplied from an external battery pack connected to
the DC IN connector, DC IN appears.
When the DISP VOLT item is set to OFF on the VF DISP 2 page of the
USER menu, this battery indicator does not appear except when it
indicates the remaining battery capacity of the Anton Bauer battery
which is shown numerically.
6 Subject illumination indicator
This appears, depending on the setting, to indicate the subject
illumination is inadequate.
7 Iris setting/auto iris override
This indicator indicates the f-stop (iris setting) of the lens.
Also, the auto iris override is displayed using two x which appear in the
upper and lower parts to the left of the F number respectively.
8 Remaining tape
This indicator indicates the remaining tape recording time (in minutes) of
the VTR.
Example of remaining tape indicator
Display Tape time remaining
F - 30 Full to 30 minutes
30 - 25 30 to 25 minutes
25 - 20 25 to 20 minutes
20 - 15 20 to 15 minutes
15 - 10 15 to 10 minutes
10 - 5 10 to 5 minutes
5 - 0 5 to 2 minutes
5 - 0 (flashing) Less than 2 minutes