Filter
Top Products
Chapter 6 Maintenance
6
6-7
2 Set the AUDIO SELECT CH-1 and CH-2 switches to AUTO.
3 Set the CH-1/2 / CH-3/4 switch to CH-1/2.
4 Aim the microphone connected to the MIC IN connector at a
suitable sound source. Check that the level indications for both
channels 1 and 2 correspond to the sound level.
5 Set the AUDIO IN CH-3 and CH-4 switches to F.
6 Set the CH-1/2 / CH-3/4 switch to CH-3/4.
7 Aim the microphone connected to the MIC IN connector at a
suitable sound source. Check that the level indications for both
channels 3 and 4 correspond to the sound level.
8 Be sure to reset the CH-1/2 / CH-3/4 switch to CH-1/2 after
checking the channels 3 and 4.
(3) Testing the manual audio level adjusting functions
1 Set the AUDIO IN CH-1 and CH-2 switches to FRONT.
2 Set the AUDIO SELECT CH-1 and CH-2 switches to MANUAL.
3 Turn the MIC LEVEL knob. Check that the audio level meter in the
display panel increases by turning it counterclockwise as seen from
the front of the camera.
(4) Testing the earphone and speaker
1 Turn the MONITOR control and check that the speaker volume
changes accordingly.