Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-116
4 Turn the MENU knob to display the desired value, and push the
MENU knob.
The z mark at the left of the selected item changes to a t mark
and the ? mark at the left of the setting changes to a z mark.
5 To continue the remaining settings, repeat steps 3 and 4.
6 When you finish the settings, turn the MENU knob to move the t
mark to OK, then push the MENU knob.
The internal clock is set with the date and time set in steps 3 to 5.
The TIME/DATE page of the DIAGNOSIS menu appears again.
The time set on the TIME ADJUST setting window is displayed.
To cancel the setting
Before performing the operation in step 6, move the t mark to ESC on
the right top of the window and push the MENU knob.
Or push the CANCEL/PRST / ESCAPE switch down to the ESCAPE
side.
All settings or changes are discarded and the TIME/DATE page of the
DIAGNOSIS menu appears.