Filter
Top Products
Before unpacking your housing kit, inspect the shipping box as well as all contents for damage during shipping.
If damage has occurred, please contact the shipping company immediately.
Every Amphibico Housing is pressure tested prior to shipping. However, damage may have occurred during shipping.
It is strongly recommended to test dive the housing once without camcorder installed to insure the housing is water tight.
This instruction manual assumes that the user is already familiar with the SONY® HDR-FX1 and HVR-Z1 camcorders.
If not, please read instruction manuals thoroughly before beginning to use the housing.
Your PHENOM FXZ1 camcorder housing comes to you as follows:
A) Marine Housing G) Carry Handle
B) 94° wide Angle bayonet mounted lens H) Allen Key 5/32" (for carry handle)
C) Removable / lockable camcorder saddle I) Allen Key 1/16" (for lead ballasts)
(shipped in its position inside the housing)
D) Front & rear neoprene covers for the lens and viewfinder J) Allen Key 5/64" (for menu navigation & Iris wheel)
E) O-ring kit with container of silicone grease
F) Instruction manual and warranty card
Instruction Manual
Video Camera Housing for
SONY
®HDR-FX1 & HVR-Z1
Before operating the unit, please read this manual carefully. Keep it for
future reference.
F
3
UNPACKING YOUR HOUSING
A
B
E
D
G