Filter
Top Products
13
Getting Started
Step 2: Attaching the supplied microphone,
eyecup and the lens hood
1 Attach the wind screen 1 to the
microphone 2.
2 Unlock the stopper of the
microphone holder 3 and open
the cover.
3 Align the convex part of the
microphone with the concave part
of the holder, then place the
microphone into the holder. Close
the cover and lock the stopper
securely.
Be sure to align the v mark on the
microphone and the | mark on the
holder facing each other.
4 Turn the plug of the microphone
counter-clockwise to 180 degrees
in the direction of the arrow 5,
and connect it to the Mic jack 4.
Attach the eyecup aligned with the eyecup
groove in the viewfinder. You can attach
the eyecup facing either the right or left
side.
Attaching the supplied
microphone
1
2
3
4
5
Attaching the eyecup
Attach the
eyecup securely
until it fits the
corresponding
part properly.
Continued ,