Filter
Top Products
[271] Troubleshooting Troubleshooting Shooting still images/movies
The image is blurred.
Make sure that [SteadyShot] is set to [On].
The picture was taken in a dark location without the flash, resulting in camera-shake. The
use of a tripod or the flash is recommended. [Hand-held Twilight] and [Anti Motion Blur] in
[Scene Selection] are also effective in reducing blur.
[272] Troubleshooting Troubleshooting Shooting still images/movies
The LCD screen darkens after a short period of time
passed.
If you do not operate the product for a certain period of time, the product switches to the
power-save mode. The product exits power-save mode when you perform operations
such as pressing the shutter button halfway.
[273] Troubleshooting Troubleshooting Shooting still images/movies
The flash takes too long to recharge.
The flash has been fired in succession in a short period. When the flash has been fired in
succession, the recharging process may take longer than usual to avoid overheating of
the camera.
[274] Troubleshooting Troubleshooting Viewing images
Images cannot be played back.
Make sure that the memory card is fully inserted into the product.
The folder/file name has been changed on your computer.
When an image file has been processed by a computer or when the image file was
recorded using a model other than this product, playback on this product is not