Filter
Top Products
by rotating the control wheel.
Note
When [Focus Mode] is [Continuous AF] and [Focus Area] is [Wide] or [Zone], the focus
range finder frame may change after the focus is achieved.
When [ AF Illuminator] is [Auto] and [Focus Area] is [Wide] or [Zone], an AF range
finder frame may be shown by the dotted line.
[56] How to Use
Using shooting functions Adjusting the focus
Focal plane phase detection AF
When there are focal plane phase detection AF points within the auto focus area, the
product uses the combined autofocus of the focal plane phase detection AF and contrast AF.
Note
When the aperture value is set to F13 or above, you cannot use the focal plane phase
detection AF. Only contrast AF is available.
Focal plane phase detection AF is available only when an applicable lens is attached. If
you use a lens that does not support focal plane phase detection AF, you cannot use
[Automatic AF], [ AF Track Duration] or [ AF drive speed].
Also, even if you use a previously purchased applicable lens, the focal plane phase
detection AF might not function unless you update the lens.
When you attach an A-mount lens (sold separately) with the Mount Adaptor (sold
separately), you cannot use the focal plane phase detection AF of this product.
[57] How to Use
Using shooting functions Adjusting the focus
Center Lock-on AF
When you press the center button, the camera detects the subject positioned in the center of
the screen and continues to track the subject.
1. MENU → (Camera Settings) → [Center Lock-on AF] → [On]
2. Align the target frame (A) over the subject and press in the center of the control
wheel. To stop tracking, select MENU → (Camera Settings) → [Center Lock-on
AF] → [Off].