Filter
Top Products
111
GB
Table of
contents
Sample photo
search
Menu search
Index
Cleaning Mode
Allows you to clean the image sensor.
• Cleaning can be performed only when the battery level is (three remaining battery icons) or more.
The use of an AC-PW20 AC Adaptor (sold separately) is recommended.
• Do not use a spray blower because it may scatter water droplets inside the camera body.
• Do not put the tip of a blower into the cavity beyond the mount, so that the tip of the blower does not
touch the image sensor.
• Hold the camera’s face downward to prevent the dust from resettling in the camera.
• Do not apply a mechanical shock to the camera during cleaning.
1 [Menu] t [Setup] t [Cleaning Mode] t [OK].
The message “After cleaning, turn camera off. Continue?” appears.
2 Confirm [OK].
The anti-dust is activated automatically.
3 Detach the lens.
4 Use the blower to clean the image sensor
surface and the surrounding area.
5 Attach the lens and turn the camera off.
Notes