Filter
Top Products
Getting started
15
GB
Removing the battery pack
Turn off the camcorder. While pressing the BATT
lever (1), remove the battery pack (2).
Using the wall outlet (wall socket)
as a power source
Connect the power cord (mains lead) to the AC
Adaptor, and connect the AC Adaptor to the
camcorder and the wall outlet (wall socket).
Align the v mark on the DC plug with that on the DC
IN jack.
Note
• You cannot charge the battery pack attached on the
camcorder by connecting the AC Adaptor.
Using the camcorder abroad – Power source
You can use the battery charger and the AC
Adaptor in any countries/regions where the power
supply is within AC 100 V to 240 V, 50 Hz /60 Hz.
Note
• Do not use an electronic transformer (travel converter), as
this may cause a malfunction.
Notes on the battery
• When you remove the battery pack and the AC
Adaptor, make sure that the power switch is set to
OFF, and the (movie)/ (still image) lamps
are turned off.
• The CHARGE lamp of the battery charger may
flash in the following situations:
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is too cold.
Remove the battery pack, and keep it in a warm
place.
– The battery pack is too warm.
Remove the battery pack, and keep it in a cool
place.
• You cannot use NP-FV30/FV50 battery packs
with this camcorder.
Notes on the battery charger and the AC
Adaptor
• Do not short-circuit the battery terminal of the
battery charger or the DC plug of the AC Adaptor
with any metallic objects. This may cause a
malfunction.
• Use the battery pack after a normal charge or full
charge is completed.
– If you use a different battery charger (sold
separately), the battery remaining indicator of
the battery charger may not indicate a correct
figure when using the battery pack with this
camcorder.
– If you charge a battery pack that has been used
at least once with this camcorder on a battery
charger having a function to indicate the usable
time, “—“ will be displayed instead.
BATT lever
Power cord (mains lead)
AC Adaptor
DC IN jack
DC plug
to the wall outlet
(wall socket)