Filter
Top Products
"Handycam" User Guide
PrintSearch
Operation Search
Before use
Getting started
Recording
Playback
Saving images with an external
device
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Top page > Customizing your camcorder > Setup > Calibration (HDR-CX200/CX210/PJ200)
Calibration (HDR-CX200/CX210/PJ200)
Use this function if the buttons on the touch panel does not work correctly.
It is recommended that you connect your camcorder to the wall outlet (wall socket) using the supplied AC
Adaptor during the operation.
1.
[Setup] [ General Settings] [Calibration].
2. Touch “ ” displayed on the screen with the corner of memory card or the like 3 times.
Touch [Cancel] to cancel calibration.
Notes
If you did not press the right spot, try the calibration again.
Do not use a sharp-pointed object for calibration. Doing so may damage the LCD screen.
You cannot calibrate the LCD screen if it is rotated, or closed with the screen facing out.
Back to top
Copyright 2012 Sony Corporation
150