Filter
Top Products
"Handycam" User Guide
PrintSearch
Operation Search
Before use
Getting started
Recording
Playback
Saving images with an external
device
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Top page > Troubleshooting > Troubleshooting > Playback on the TV
Playback on the TV
Neither image nor sound is played on the connected TV.
Images are not output from the HDMI OUT jack, if copyright protection signals are recorded in the
images.
The top, bottom, right, and left edges of images are trimmed slightly on a
connected TV.
The LCD screen of your camcorder can display recording images across the entire screen (full pixel
display). However, this may cause slight trimming of the top, bottom, right, and left edges of images
when played back on a TV which is not compatible with full pixel display.
It is recommended you record images using the outer frame of [Guide Frame] as a guide. [Details]
The image appears distorted on the 4:3 TV.
This happens when viewing an image recorded in the 16:9 (wide) mode on a 4:3 TV. Set [TV Type]
correctly and play back the image. [Details]
Black bands appear at the top and bottom of the screen of the 4:3 TV.
This happens when viewing an image recorded in the 16:9 (wide) mode on a 4:3 TV. This is not a
malfunction.
The images being played back do not appear on the LCD screen when you
connect the camcorder to a TV and play back images.
Highlight Playback or a scenario will not appear on the LCD screen of the camcorder while it is
connected to a TV and play back images.
Back to top
Copyright 2012 Sony Corporation
169