Filter
Top Products
15
US
HDR-CX760V/PJ760/PJ760V
Power zoom lever (30)
PHOTO button (27)
Eyecup
Viewfinder (23)
CHG (charge) lamp (18)
Battery pack (18)
START/STOP button (27)
DC IN jack (18)
Viewfinder lens adjustment lever (23)
(microphone) jack (PLUG IN POWER)
(headphones) jack
A/V Remote Connector (50)
Grip belt
Loop for a shoulder belt
Built-in USB Cable (19)
BATT (battery) release lever (20)
Tripod receptacle
Attach a tripod (sold separately: the length of
the screw must be less than 5.5 mm (7/32 in.)).
To fasten the grip belt
To attach the lens hood
Align the lens hood with the camcorder properly
(), then turn the securing ring of the lens hood
in the direction of the arrow ().
When attaching the lens hood, align the
opening section of the lens hood with the flash-
emitting section of the camcorder properly.
To remove the lens hood, turn the securing ring
of the lens hood in the opposite direction from
that of the arrow.
Remove the lens hood when you record movies
using the NightShot function. If you do not do
so, the shadow of the lens hood will be reflected
and recorded in your movies.
Remove the lens hood when you operate
the camcorder with the supplied remote
commander.
Securing ring