Filter
Top Products
Operating the Camera
Using the Trigger Button
28
To use this function, you need to make Image memory
active and set the details in the Trigger menu of the
Administrator menu (page 73).
1
Display the image on the monitor window.
2
Select Image memory from the trigger drop-down
list.
3
Click .
The still image of the moment you click is captured,
and the image file is recorded.
Controlling alarm output 1, 2
You can control Alarm output 1, 2.
To use this function, you need to make Alarm output 1
or Alarm output 2 active in the Trigger menu of the
Administrator menu (page 74).
1
Display the image on the monitor window.
2
Select Alarm output1 or Alarm output2 from the
trigger drop-down list.
3
Click .
The alarm output is switched by clicking.
The alarm output mode can be selected from
Toggle or Timer of Alarm output 1, 2 in the
Trigger menu (page 74).
Tip
For the connection of peripheral devices to the alarm
output of the I/O port, see the supplied Installation
Manual.
Controlling Day/Night function
You can control the Day/Night function On (night mode)
and Off (day mode).
To use this function, you need to make Day/Night active
in the Trigger menu of the Administrator menu
(page 74).
1
Display the image on the monitor window.
2
Select Day/Night from the trigger drop-down list.
3
Click .
Each click switches the Day/Night function
alternately between On (night mode) and Off (day
mode).
Note
If Day/Night mode in the Trigger-Day/Night menu
(page 74) is set to Disable or Auto, you cannot control
the Day/Night function by clicking .
Playing the audio file stored in the
camera
You can play the audio file previously stored in the
camera using the SNC audio upload tool.
To use this function, you need to make Voice alert1,
Voice alert2 and Voice alert3 active in the Trigger menu
of the Administrator menu (page 74).
1
Display the image on the monitor window.
2
Select Voice alert1, Voice alert2 or Voice alert3
from the trigger drop-down list.
3
Click .
Playback of the selected audio file starts and the
playback sound is output from the speaker
connected to the camera.