Filter
Top Products
Operating the Camera
Administrator and User
14
Operating the Camera
The Operating the Camera section explains how to
monitor the image from the camera using the Web
browser. Use Internet Explorer as the Web browser.
The functions of the camera should be set by the
Administrator. For setting the camera, see
“Administrating the Camera” on page 28.
Administrator and User
This network camera classifies the people who log in into
the “Administrator” and the “User.”
The “Administrator” can use all functions of this network
camera including camera setting. The functions the
“User” can use are monitoring the image and audio from
the camera, and controlling the camera. The “Viewer
mode” setting restricts the user's access right, and the user
is classified as the one of four types.
Each type of the user can use the following functions.
z Usable function
– Not usable function
The access rights of the administrator and the user can
be set in “Setting the User — User setting Menu” on the
Advanced mode menu for the administrator on page 46.
Function Administrator
User
Full Pantilt Light View
Monitor a live image zzzzz
Watch date and time zzzzz
Control the frame rate (Usable only when JPEG mode is selected) zz–––
Control the image view size zzzz–
Zoom a image by the digital zoom zzzz–
Save the still image in the computer zzzz–
Send an image file to the FTP server zz–––
Send an image attached to a mail zz–––
Record an image on the inside memory of the camera zz–––
Control the Alarm out of the I/O port on the camera main unit zz–––
Switch the TCP/UDP transmission mode (Available in MPEG4
mode only)
zz–––
Perform the zoom operation zzz––
Call the Preset position zzz––
Control the audio zzzzz
Control the setting menu z ––––