Filter
Top Products
Administrating the Camera
Configuring the Network — Network setting Menu
41
Reset Tab
Reset camera menu
Click Reset, and “Camera menu setting is reset to
default. Are you sure?” is displayed. To reset to default,
click OK.
Configuring the Network
— Network setting Menu
When you click Network on the Advanced mode menu,
the Network setting menu appears.
Use this menu to configure the network to connect the
camera and the computer.
The Network setting menu consists of four tabs,
Network, Wireless, PPPoE and Dynamic IP address
notification.
Network Tab
This section provides the menus for connecting the
camera through the network cable.
MAC address
Displays the MAC address of the camera.
Obtain an IP address automatically
(DHCP)
DHCP server is installed on the network. Select it when
the IP address is assigned by DHCP server. IP address is
assigned automatically.
Note
When you set Obtain an IP address automatically
(DHCP), make sure that DHCP server is working on the
network.
Use the following IP address
Select this when a fixed IP address is set.
IP address
Type the IP address of the camera.