Filter
Top Products
Operating the Camera
Controlling the camera on a panorama image
24
Controlling the camera
on a panorama image
When you can control the camera, the panorama widow
is displayed under the normal camera window.
In the panorama window, an image of 360° around the
camera is displayed as a panorama image. When you
click on the displayed panorama image, the camera
faces the clicked place.
Creating the panorama image
Create the panorama image with the supplied “SNC
panorama creator”. Refer to page 71 for details.
Tip
The panorama image is the still image converted from
the image taken when you were going to create a
panorama image with “SNC panorama creator”. When
the camera is moved or when the layout around the
camera is changed, create the panorama image again.
Facing the camera toward the
specified point
1
Create a panorama image with “SNC panorama
creator” and display it.
2
Click the point you want to watch on the panorama
image.
The camera is moved to face toward the clicked
point, and the present image of the point is
displayed in the normal camera widow.
Not to display the panorama window
When you are not going to use the panorama image,
pressing under the panorama window twice
prevents its display.
Normal camera window
SNC-RZ25N/P
panorama window
Click the point you
want to watch.
The present situation is
displayed at the clicked point.