Filter
Top Products
Operating the Camera
Sending an Image File / Recording a Still Image in the Memory of the Camera
25
Sending an Image File
You can send a captured still image with an attached
mail or to the FTP server.
To use this function, you need to make the e-
Mail(SMTP) and FTP client active, and set the address
properly in the Trigger setting menu on the
Administrator menu (page 57).
Sending a Monitor Image via e-Mail
1
Monitor the image on the monitor window.
2
Select e-Mail from the Trigger list box.
3
Click Trigger icon.
The still image of the moment you click is captured,
and the mail attached with the image file is sent to
the mail address you have set.
Sending a Monitor Image to an FTP
Server
1
Monitor the image on the monitor window.
2
Select FTP from the Trigger list box.
3
Click Trigger icon.
The still image of the moment you click is captured,
and the image file is sent to the FTP server.
Recording a Still Image
in the Memory of the
Camera
You can capture a camera image as a still image and
record it in the memory of the camera. “Memory”
contains Built-in memory and CF memory card, and
you can select one of them in the setting window.
To use this function, you need to make Image memory
active and to set details of the image memory in the
trigger setting menu on the Administrator menu
(page 57).
1
Monitor the image on the monitor window.
2
Select Image memory from the Trigger list box.
3
Click Trigger icon.
The still image of the moment when you click is
captured, and the image file is recorded in the
memory of the camera.