Filter
Top Products
73
Still image printing (PictBridge printer)
When [USB Connect] is not set
to [PictBridge] in the SET UP
settings
You cannot use the PictBridge function,
even when you turn on the camera.
Disconnect the USB cable and set [USB
Connect] to [PictBridge] (page 72).
Printing images
You can select an image and print it. Set up
the camera following the procedure on page
72, and then connect the printer.
• You cannot print movies.
• If an error message is sent from the connected
printer during the connection, flashes for
about five seconds. In such cases, check the
printer.
On the single screen
a Display the image you want to
print with b/B.
b Press MENU.
The menu appears.
c Select (Print) with b/B, then
press z.
d Select [This image] with v/V,
then press z.
The Print screen appears.
• Setting items not available for a particular
printer are not displayed.
e Select [Quantity] with v/V,
select the number of images
with b/B.
You can select the number up to 20.
Control button
MENU
2/9
101
VGA
Exit OK
1
Print
Off
Off
Quantity
Date
Index