Filter
Top Products
82
The image colors are not correct.
• Picture Effect function is activated. Cancel the Picture Effect function (page 35).
Vertical streaks appear when you are shooting a very bright subject.
• The smear phenomenon is occurring. This phenomenon is not a malfunction.
Noise appears in the image when you view the screen in a dark place.
• The camera is attempting to increase the visibility of the screen by temporarily brightening
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
• Set [Red Eye Reduction] in the (Setup) menu to [On] (page 46).
• Shoot the subject at a distance closer than the recommended shooting distance using the flash
(
t step 5 in “Read This First”).
• Light the room and shoot the subject.
Dots appear and remain on the screen.
• This is not a malfunction. These dots are not recorded (page 5, t “Read This First”).
Cannot shoot images in succession.
• The internal memory or “Memory Stick Duo” is full. Delete unnecessary images (t step 6 in
“Read This First”).
• The battery level is low. Install charged battery pack.
Refer to “Computers” (page 84) in conjunction with the following items.
Your camera cannot play back images.
• Set the mode switch to (page 24).
• The folder/file name has been changed on your computer (page 64).
• When an image file has been processed by a computer or when the image file was recorded
using a model other than that of your camera, playback on your camera is not guaranteed.
• The camera is in USB mode. Delete the USB connection (page 62).
The image appears rough right after playback starts.
• The image may appear rough right after playback starts due to image processing. This is not a
malfunction.
Viewing images