Filter
Top Products
103
Customizing Your Camcorder Выполнение индивидуальных установок на видеокамере
Changing the MENU settings
* DCR-TRV510E only
** These items are displayed only when the STANDBY switch is set to MEMORY.
Notes on FORMAT
Format (initialize) the builf-in flash memory when the warning indicator flashes fast.
To format (initialize) the built-in flash memory, carry out the following operation.
(1) Set the POWER switch to CAMERA or PLAYER. When you set the POWER switch to CAMERA,
turn STANDBY to MEMORY.
(2) Press MENU to display the MENU settings.
(3) Turn the SEL/PUSH EXEC dial to select , then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select FORMAT, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select OK, then press the dial.
To cancel formatting, select RETURN, then press the dial.
• Formatting erases all information in the built-in flash memory, inclusing the protected image data.
Check the contents of the flash memory befor formatting.
• Be sure that the battery pack is fully charged when formatting the built-in flash memory. Formatting
takes about three seconds.
•Do not turn the POWER switch or press any button while the display shows “FORMATTING”.
Icon/item
CONTINUOUS*
QUALITY*
FLD./FRAME*
PROTECT*
SLIDE SHOW*
DELETE ALL*
FORMAT*
PHOTO SAVE*
Mode
r OFF
ON
MULTI SCRN
r STANDARD
FINE
r FIELD
FRAME
r OFF
ON
Meaning
Not to store continuously
To record 3 or 4 pictures continuously
To record 9 pictures continuously
To record still pictures in the standard image quality
mode
To store still pictures in the fine image quality mode
To record moving subjects
To record stopping subjects in high quality
Not to protect still pictures
To protect selected still pictures against accidental
erasure. (p. 96)
To play back images in a continuous loop.
(p. 94)
To delete all the images (p. 97)
To format the built-in flash memory
To duplicate still pictures (p. 86)
POWER
switch
CAMERA**
PLAYER
CAMERA**
CAMERA**
PLAYER
CAMERA**
PLAYER
CAMERA**
PLAYER
CAMERA**
PLAYER
CAMERA**
PLAYER