Filter
Top Products
123
Additional Information Дополнительная информация
C:21:00
English
Warning indicators and messages
If indicators and messages appear in the viewfinder, on the LCD screen or in the display window,
check the following:
See the page in parentheses “( )” for more information.
•The warning messages do not appear in the mirror mode.
•The indicators and messages are displayed in yellow.
Warning indicators
The battery is dead or nearly
dead
Slow flashing:
•The battery is nearly dead.
Fast flashing:
•The battery is dead (p. 12).
Warning indicator as to
tape
Slow flashing:
•The tape is near the end.
•No tape is inserted (p. 20).*
•The write-protect tab on the
cassette is out (red) (p. 21)*
Fast flashing:
•The tape has run out (p. 20, 35).*
The image data is protected
Self-diagnosis display (p. 122)
The lithium battery is weak or is
not installed (p. 116)
You need to eject the cassette
Slow flashing:
•The write-protect tab on the
cassette is out (red) (p. 21).*
Fast flashing:
•Moisture condensation has
occurred (p. 131).
•The tape has run out (p. 20, 35).*
•The self-diagnosis display function
is activated (p. 122).
Warning messages
The video heads are dirty.
* You hear the melody or beep sound.
CLEANING
CASSETTE
You cannot use the built-in flash
memory*
Slow flashing:
•The built-in flash memory is full.
Fast flashing:
•You cannot use the built-in flash
memory. Format it (p. 103).
Moisture condensation has
occurred*
Fast flashing:
•Eject the cassette, turn off your
camcorder, and leave it for about 1
hour with the cassette
compartment open (p. 131).
The video heads are dirty
Fast flashing:
•You need to clean the heads
using the Sony V8-25CLD
cleaning cassette (not supplied)
(p. 132).