Filter
Top Products
Quick Start Guide
7
Recording a picture (p. 18)
Monitoring the playback picture on the LCD
screen (p. 27)
2Press m to rewind the tape.
3Press N to start playback.
Note
Do not pick up your camcorder by
holding the viewfinder, the LCD
panel, or the battery pack.
3Open the LCD panel
while pressing OPEN.
The picture appears
on the LCD screen.
2Set the POWER
switch to CAMERA
while pressing the
small green button.
4Press the red button.
Your camcorder
starts recording. To
stop recording, press
the red button again.
1Remove the lens cap.
1Set the POWER
switch to VCR while
pressing the small
green button.
VCR
POWER
OFF
CAMERA
(
CHARGE
)
VCR
POWER
OFF
CAMERA
(
CHARGE
)
VCR
POWER
OFF
CAMERA
(
CHARGE
)
REW
PLAY
Viewfinder
When the LCD panel is closed, use the viewfinder placing your
eye against its eyecup.
The picture in the viewfinder is black and white.
When you purchase your camcorder, the clock setting is set to off. If you want to record the
date and time for a picture, set the clock setting before recording (p. 16).