34
Recording a picture
Using the zoom feature
Push ZOOM up or down slightly for a slower zoom. Push it firmly for a faster zoom.
Using the zoom function sparingly results in better-looking recordings.
“T” side: for telephoto (subject appears closer)
“W” side: for wide-angle (subject appears farther away)
To use a zoom greater than 10×
A zoom greater than 10× is performed digitally. To activate digital zoom, set D ZOOM
to 20× or 120× in the menu settings. The digital zoom function is set to OFF as a default
setting (p. 102).
Note
During optical-zooming or when the zoom position is set to the “W”-end side, the
SteadyShot function does not work.
When you shoot close to a subject
If you cannot get a sharp focus, push ZOOM toward the “W” side until the focus is
sharp. You can shoot a subject that is at least about 80 cm (about 2 feet 5/8 inch) away
from the lens surface in the telephoto position, or about 1 cm (about 1/2 inch) away in
the wide-angle position.
W
T
T
W
T
W
T
W
The right side of the bar shows the digital
zooming zone.
The digital zooming zone appears when you
set D ZOOM to 20× or 120× in the menu
settings (p. 102)