Filter
Top Products
121
“Memory Stick
” Operations
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX
Recording superimposed images on a tape
Before operation
•Insert a tape for recording into your camcorder.
•Insert a “Memory Stick” with recorded still images into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press MEMORY MIX.
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
(3) Press MEMORY –/+ to select the still image you want to superimpose.
MEMORY – : To display the previous image
MEMORY + : To display the following image
(4) Select the desired mode with the SEL/PUSH EXEC dial.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM y M. OVERLAP
(5) Press the SEL/PUSH EXEC dial.
The still image is superimposed on the moving picture.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
M. CHROM – Blue chroma key (blue background) to extract a still image
and superimpose it on a moving picture
M. LUMI – Brightness level used when extracting a still image and
superimposing it on a moving picture
C. CHROM – Blue chroma key (blue background) to extract a moving
picture and superimpose it on a still image
M. OVERLAP – No adjustment necessary
The fewer bars there are on the screen, the stronger the effect.
(7) Press START/STOP to start recording.