Filter
Top Products
94
If you connect audio equipment, you can add sound to your recorded tape already
recorded in the 12-bit mode by specifying the start and end points. The original sound
will not be erased.
Select one of the following connections to add audio.
Connecting the microphone with the MIC jack
You can check recorded picture and sound by connecting your camcorder to a TV with
the A/V connecting cable.
Recorded sound is not output from the speaker. Check the sound by using a TV or
headphones.
Connecting the microphone to the intelligent accessory shoe
Audio dubbing
Intelligent accessory shoe
Microphone (optional)
: Signal flow
MIC
(PLUG IN
POWER)
Microphone (optional)