Filter
Top Products
109
“Memory Stick” Operations (DCR-TRV22/TRV33 only)
Inserting the “Memory Stick”
Open the lid of the “Memory Stick” slot. Insert the “Memory Stick” in the “Memory
Stick” slot as far as it can go with the b mark as illustrated, then close the lid.
Ejecting the “Memory Stick”
Open the lid of the “Memory Stick” slot. Slide MEMORY EJECT in the direction of the
arrow.
Notes
•If you insert the “Memory Stick” forcibly in the opposite direction, the “Memory
Stick” slot may be damaged.
•Do not insert anything other than the “Memory Stick” into the “Memory Stick” slot.
This may cause a malfunction.
While the access lamp is lit or flashing
Do not shake or strike your camcorder because your camcorder is reading the data from
the “Memory Stick” or recording the data on the “Memory Stick.” Do not turn the
power off, eject the “Memory Stick” or remove the battery pack. Otherwise, image data
breakdown may occur.
If “ MEMORY STICK ERROR” appears
Reinsert the “Memory Stick” a few times. The “Memory Stick” may be damaged if the
indicator still appears. If this occurs, use another “Memory Stick.”
Inserting/Ejecting the “Memory Stick”
Access lamp
MEMORY EJECT