Filter
Top Products
86
MOVIE SETTINGS (Continued)
You can display the guide frame and check
that the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The guide frame is not recorded. Press
DISP/BATT INFO to make the guide frame
disappear. The default setting is [OFF].
z Tips
• Positioning the subject at the cross point of the
guide frame makes a balanced composition.
Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
brightness. When you change the default
setting, is displayed. The zebra pattern
is not recorded.
BOFF
The zebra pattern is not displayed.
70
The zebra pattern appears at a screen
brightness level of about 70 IRE.
100
The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
b Notes
• Portions of the screen where brightness is about
100 IRE or above may appear overexposed.
z Tips
• IRE represents the screen brightness level.
BON
Always displays the remaining media
indicator.
AUTO
Displays the remaining recording time of
movies for about 8 seconds in situations
such as those described below.
– When your camcorder recognizes the
remaining media capacity with the
(Movie) lamp lighting up.
– When you press DISP/BATT INFO to
switch the indicator from off to on with
the (Movie) lamp lighting up.
– When you select the movie recording
mode on the HOME MENU.
b Notes
• When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
You can display the recording date and time
when you play back images on a device
with a subtitle display function. The default
setting is [ON]. Also refer to the instruction
manual of the playback device.
b Notes
• Discs recorded with HD (high definition) image
quality
or the “Memory Stick PRO Duo” can
be played on AVCHD format compatible
devices only (p. 74).
• When [MOVIE MEDIA SET] is set to
[ INT. MEMORY] (HDR-UX19E/UX20E)
or [ MEMORY STICK], you cannot use
this function.
You can set this function when you shoot
still images using the built-in flash, or an
external flash (optional) that is compatible
with your camcorder.
B AUTO
Automatically flashes when there is
insufficient ambient light.
ON ( )
Always flashes regardless of the
surrounding brightness.
GUIDEFRAME
ZEBRA
REMAINING SET
SUB-T DATE
FLASH MODE