Filter
Top Products
94
CLOCK/ LANG
(Items to set clock and language)
Touch 1, then 2.
If the item is not on the screen, touch /
to change the page.
How to set
(HOME MENU) t page 82
See
page 23.
You can adjust a time difference without
stopping the clock.
Set your local area using / when using
your camcorder in other time zones.
Refer to the world time difference on page
123.
You can change this setting without
stopping the clock.
Set to [ON] to move the time forward
1 hour.
You can select the language to be used on
the LCD screen.
z Tips
• Your camcorder offers [ENG[SIMP]]
(simplified English) for when you cannot
find your native tongue among the
options.
GENERAL SET
(Other setup items)
Touch 1, then 2.
If the item is not on the screen, touch /
to change the page.
How to set
(HOME MENU) t page 82
The default settings are marked with B.
The default setting is [ON], allowing you to
view the demonstration in about 10
minutes, after you turn on your camcorder
and light up the (Movie) lamp.
z Tips
• The demonstration will be suspended in
situations such as those described below.
– When you press START/STOP or PHOTO.
– When you press DUBBING button (HDR-
UX19E/UX20E)
– When you touch the screen during the
demonstration. (The demonstration starts
again after about 10 minutes.)
– When you slide the disc cover OPEN switch.
– When you light up the (Still) lamp by
sliding the POWER switch.
– When you press (HOME)/ (VIEW
IMAGES).
The camera recording lamp on the front of
your camcorder lights up, as the default
setting is [ON].
See page 130.
CLOCK SET
AREA SET
SUMMERTIME
LANGUAGE SET
DEMO MODE
REC LAMP (Recording
lamp)
CALIBRATION