Filter
Top Products
23
Control
XCD-SX910CR/X710CR
XCD-SX910UV
XCD-SX910/X710
Before sending a command, check the predetermined
variable range and check whether the feature supports
AUTO mode.
Note that variable ranges for Pan/Tilt differ
*
1)
According to the IEEE 1394 specifications, the most significant bit is shown as 0.
*
2)
These features comply with IIDC v.1.31.
considerably depending on the video mode. After
switching video mode, check the variable range of the
new video mode.
Address Data Bit*
1)
F0F00500h 8905A073h 0 This feature exists.
(Brightness) 4 The value can be read out.
7 Manual setting can be selected.
8-19 Min. 0
20-31 Max. 63
F0F00504h 8905A073h 0 This feature exists.
(AutoExposure) 4 The value can be read out.
7 Manual setting can be selected.
8-19 Min. 90
20-31 Max. 115
F0F0050Ch CB003424h 0 This feature exists.
(White Balance) 4 The value can be read out.
(XCD-SX910CR/X710CR only)
7 Manual setting can be selected.
8-19 Min. 0
20-31 Max. 127
F0F00510h 8B1803FFh 0 This feature exists.
(Hue) 4 The value can be read out.
(XCD-SX910CR/X710CR only)
7 Manual setting can be selected.
8-19 Min. 0
20-31 Max. 63
F0F0051Ch CB003424h 0 This feature exists.
(Shutter) 1 Absolute value control possible
4 The value can be read out.
6 Auto setting can be selected.
7 Manual setting can be selected.
8-19 Min. 3
20-31 Max. 1150
F0F00520h 8B1803FFh 0 This feature exists.
(Gain) 4 The value can be read out.
6 Auto setting can be selected.
7 Manual setting can be selected.
8-19 Min. 384
20-31 Max. 1023
F0F00530h 8C81C000h 0 This feature exists.
4 The value can be read out.
5 Feature can be switched between ON and OFF.
8Trigger Source0 exists.*
2)
15 Software Trigger Mode exists.*
2)
16 Trigger Mode0 exists.
17 Trigger Mode1 exists.
F0F00584h 89
******
0 This feature exists.
(Pan) 4 The value can be read out.
F0F00584h 7 Manual setting can be selected.
(Tilt) 8-19 Min. (Depends on the video mode.)
20-31 Max. (Depends on the video mode.)
F0F0058Ch 8C81C000h 0 This feature exists.
(Optical Filter) 4 The value can be read out.
(XCD-SX910CR/X710CR only)
7 Manual setting can be selected.
8-19 Min. 0
20-31 Max. 3