Filter
Top Products
26
Control
XCD-SX910CR/X710CR
XCD-SX910UV
XCD-SX910/X710
Partial Scan Operation
Partial scan can be set using either the SettingBit or
IIDC v.1.20 interchange.
An example of the setting procedure (In the case of an
XCD-SX910CR/SX910UV/SX910)
960 480
240
1280
320
640
When shooting the center of the whole
screen with the screen size of 640 ×
480, and color coding set to 8 bit Black
& White Mode, the packet size is set to
maximum in order to capture the
image at the highest speed.
Start
Set the format.
Check available modes.
Set the mode.
Obtain a CSR offset address.
Go to Step 2.
Write E0000000h in F0F00608h.
(Set the format to 7.)
Read F0F0019Ch. F8000000h is
returned, thus Mode0 to Mode4 are
available.
Write 00000000h in F0F00604h.
(Set the Mode to 0.)
Read F0F002E0h. 003C4000h is
returned, thus the offset address for
Mode0 is F0F10000h. (F0000000h
+4*003C4000h)