Filter
Top Products
User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06
57
5.1.5 Password
The Password menu allows administrator to change the password settings for
accessing the unit. Select <Password> in the System Setup menu and press
ENTER; the menu displays as follows. Three account/password are offered
for setting.
Password
1. Admin1 Password
2. User1 Password
3. Admin2 Password
4. User2 Password
5. Adimin3 Password
6. User3 Password
7. Enable Password
8. Load Factory Password
No
None
5.1.5.1 Admin / User Password(s)
Only who entering with the administrator password is allowed to change the
user and administrator passwords (to any 4~8 digit number). Use the UP /
DOWN Direction keys to enter the desired account and press ENTER, the
following menu is displayed.
Admin Password
________
Press Channel Keys To Enter Password
(4-8 Digits)
Press ◄ To De le te
Use CHANNEL keys to input the new password and confirm the new
password. After setting the new password, press ENTER to save the settings
and exit.
5.1.5.2 Enable Password
This item is used to determine if a password is required for accessing the
OSD menu. Select <YES> to demand entering password when accessing the
OSD menu; if not, select <NO>.