Speco Technologies DVR-16TN Camcorder User Manual


 
User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06
85
5.4.4.4 Event Max PPS
Event Max PPS is used to set the event recording rate for Event status.
Normally, the Event PPS is set to be equal to or greater than Normal PPS; the
setting depends on your application. If the Event PPS is set to <0>, the
DVR-4TN/8TN/16TN/16TS/16TT series unit stops recording event video
during alarms.
5.4.4.5 Event Qlty
This item is used to set the picture size for event status recording. Refer to
Section 5.4.4.3 for the available options.
5.4.4.6 Event Active
Users are allowed to choose which alarm type needs to be recorded. The
available options are <Alarm> (alarm events), <Motion> (motion detection
events), <Both> (alarm event + motion detection), and <None> (no events
active). The default setting is <Both>, which includes Alarm and Motion event
recording.
5.4.5 ezRecord Setup
This item aims to avoid the complicated record settings and to make the setup
much easier. Note that this item can be reached only when you select
<ezRecord> as the option for <Preset Config>. For more information, please
refer to the
Appendix J: ezRecord Diagram Sample.
Select <ezRecord Setup> from <Record Setup> and press ENTER, the
sub-menu appears as shown below:
ezRecord Setup
How Many Days To Record
Daytime Record
Night Record
Weekend Record
Overall Recording Condition
1 Days
Yes
Yes
Yes
Best