Speco Technologies DVR-16TN Camcorder User Manual


 
User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06
83
5.4.2.1 Day / Night Time Start / End
The Day/Night Start Time determines the durion of day/ night recording time.
Time is indicated in 1-minute increments. The time display format in this menu
is based on the setting of Time Display Mode.
5.4.2.2 Weekend Schedule
The Weekend Schedule determines whether a weekend schedule is in effect.
Choose <YES> to take effect the related weekend settings.
5.4.2.3 Weekend Start / End
The Weekend Start Time indicates the specific day and time that a weekend
begins, for example, FRI 18:00. The Weekend End Time indicates the specific
time and day that a weekend ends, for example, MON 06:00. Time is
indicated in 1-minute increments.
Note that the value you have set indicates when the regular Day and Night
scheduling ends, and Weekend recording begins.
5.4.3 Preset Record Configuration
The <Preset Config> is used to select the preset recording quality and frame
rate. Different default recording quality levels are offered for the user to
choose: <Best Quality>, <Standard>, <Extended Record>, <Event Only>,
<ezRecord> and <OFF>.
According to various Record modes, the preset configuration options for
normal and event status are described in terms of relative recording rate
(Picture per Second; PPS) and recording size for each channel in the table
below.
These preset conditions override any other quality and rate settings. The
default Preset Configuration setting is <Standard>.
You can refer to Appendix B: Record Configuration for detailed information.