SUPER MICRO Computer 6015B-T Security Camera User Manual


 
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6015B-3/6015B-
T. Installation and maintenance should be performed by experienced technicians
only.
The SuperServer 6015B-3/6015B-T is a high-end server based on the SC815TQ-560
1U rackmount chassis and the Super X7DBR-3/X7DBR-E, a dual processor
serverboard that supports Intel
®
Xeon
®
5400/5300/5200/5100/5000 series proces-
sors at a Front Side (System) Bus speed of 1333/1066/667 MHz and up to 32 GB
of ECC FBD DDR2-667533 SDRAM.
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with
the server system and describes the main features of the X7DBR-3/X7DBR-E
serverboard and the SC815TQ-560 chassis, which comprise the SuperServer
6015B-3/6015B-T.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6015B-
3/6015B-T into a rack and check out the server con guration prior to powering
up the system. If your server was ordered without processor and memory com-
ponents, this chapter will refer you to the appropriate sections of the manual for
their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.