Filter
Top Products
4
Mounting Diagram
To permanently mount the camera:
• Remove the circular mounting
plate from the base of the stand by
unscrewing the stand. See the image
(right).
• Remove the metal ring. Keep it
somewhere safe if you think you might
need it.
• Take the plastic mounting plate and
apply it to a wall. Mark the two main
screw points.
• Insert two screws into the wall. If mounting to masonry/brickwork, use wall
plugs. Leave approximately 2.5mm (about 1/10 of an inch) of screw protruding.
• Apply the plastic mounting plate to the wall. Twist to lock in place.
• Attach the stand and camera to the mounting plate.
Note: There’s no requirement to mount the camera. The metal ring in the base
provides weight so the camera can simply be placed on a at, horizontal surface and
be stable.
Unscrewing the stand. The plastic screw
thread has a tight grip, so it may take a
little force to unscrew.