Swann SWADS450IPC Security Camera User Manual


  Open as PDF
of 20
 
7
Local WIFI Conguration: Access
To congure the camera via the Local WIFI Conguration mode, you’ll need the
following:
• Your Android device or iPhone/iPad with the SwannSmart app correctly installed.
• An internet connection (other than your mobile device) that the camera can use
to connect to the Internet.
Local WIFI
The camera will act as its own WIFI access point, allowing you to connect directly
to the camera from your phone/tablet using the SwannSmart app. All the local
conguration is achieved through this local conguration mode.
To initiate local WIFI conguration mode:
• Flip the switch on the rear of the camera.
• While is set to ON, the camera will act as its own
WIFI server. You’ll be able to connect directly to the
camera from an Android-handset or an iPhone, with
the appropriate app installed correctly.
Connecting to the camera locally from an
iPhone/iPad or Android device:
• Android: Open Settings > Wireless &
networks > Wi-Fi Settings
• iPhone: Choose Settings > Wi-Fi
• From the list of available networks,
choose ADS-450xxxx (where “xxxx” is
a code which will vary).
• Each time Local WIFI mode is turned
on, the network name will change
slightly (to avoid creating conicts or
creating errors when devices cache
network lists).
• If you’ve got multiple cameras in Local
WIFI Cong mode, then congure
them one at a time.
• Launch the SwannSmart app.
 previous next