Filter
Top Products
SWAROVSKI OPTIK46
BALLISTIC TURRET
You can assemble the Ballistic Turret in a few steps, adjust it exactly
to your firearm, and you can change the distances that have been
selected at any time. There are other distance settings available to you in
addition to the four marked distances. A specifically developed ballistic
program calculates the values that you need (number of clicks) for the
desired distances. In addition, there is a new personalized ballistic cam
available upon request.
MODELS WITH BALLISTIC TURRET
Z6i 1.7-10x42 BT,v Z6i 2.5-15x44 P BT,
Z6(i) 2.5-15x56 P BT, Z6(i) 3-18x50 P BT, Z6(i) 5-30x50 P BT
Z5 3.5-18x44 P BT, Z5 5-25x52 P BT, Z3 4-12x50 BT
PARALLAX TURRET
In general, rifle scopes are set to be parallax-free at 109 yds so that, at
this distance, the target being observed through the rifle scope and the
reticle are located in the same plane. At longer distances, the target is
not displayed in the same plane as the reticle. Aiming errors may occur
if the hunter fails to look exactly through the center of the eyepiece. The
parallax can sometimes affect the impact point, especially with high-
magnification rifle scopes that are often used for long-range shooting.
A notch at the 109 yds mark allows you to locate the normal parallax
correction at 109 yds and set it securely, especially at twilight.
MODELS WITH PARALLAX TURRET
(109 yds lock-in position) Z6(i) 2.5-15x44 P, Z6(i) 2.5-15x56 P,
Z6(i) 3-18x50 P, Z6(i) 5-30x50 P
(without lock-in position) Z5 3.5-18x44 P, Z5 5-25x52 P
BRINGING
DISTANT TARGETS
CLOSER
You can find more information at
Z6.SWAROVSKIOPTIK.COM/EN/FEATURES/BALLISTIC-TURRET