Filter
Top Products
19
Parameter
Settings
(Bold=default)
Description
Time Lapse
On, Off Turns Time Lapse recording mode on/
off. Pressing OK after selecting On will
change to the Set Time Lapse screen,
which allows you to set the Start and
Stop times in hours (0-24) and minutes
(00-59).These set the times each day
that recording begins and ends (24
-hr clock, so 13:00 hours=1PM). Use
the RIGHT key to step through the
fields, and use UP/DOWN to change
the settings. After you set the “Stop”
minutes, the next press of the RIGHT
arrow key will jump to the screen for
setting the Interval (how often the Trail
Cam will "wake up" and record). You
can select 60, 30, 15, 5 or 1 minutes
(default is 5M).
Video Sound
(only affects
video clips)
On, Off Select “On” to record audio along with
the video when the camera is set to
video mode (saved file sizes will be
slightly larger).
Default Set
Cancel,
Execute
Select “Execute” and press OK to
restore all parameters to the original
factory default settings. If the camera is
behaving oddly and you think you may
have changed the setting for something
accidently (but aren’t sure which one),
this will reset all parameters to their
most commonly used or “generic”
settings.