Filter
Top Products
INSTALLING A USB DEVICE OR MEMORY CARD
To insert a memory card. Position the card with the cropped corner facing
the bottom of the screen and press gently in.
To release a memory card. Grip both sides of the card and gently pull out.
When rst switched on the pictures will display as a Slide Show. Thereafter
the display will depend on the setup you have customised.
• If you switch on the DPF with a USB drive and a memory card inserted in
the frame, the photos on the memory card will be displayed.
You can navigate the frame in three ways.
Via the Rear Panel controls.
Via the Remote handset. This manual concentrates on handset navigation
as it the easiest and has the most comprehensive control functions.
You can also navigate a slide show via the On Screen Menu. See Page 11
VIEWING PHOTOS
In the main menu, you can select a connected memory device to view
photos, and set other parameters.
1 When pictures are being displayed press the MENU button to access the
main menu.
2 Use the
buttons on the handset to select a menu option.
3 Press OK on the handset to conrm the option or enter the menu item.
Page 9
USB Drive
SD Card, etc
The main menu choices are:
USB View images on the USB drive.
SD/MMC/MS View images on the media card
Setup Set up slideshows and frame parameters.
(If a card or USB drive is not connected that icon will not display)