Tekxon Technology X52 Digital Camera User Manual


 
35
11 Further information
11.1 Safety instructions
Although this product is safe, please observe the following information and warnings.
Caution
1. Do not modify or dismantle the camera.
2. Contact your dealer for repairs and inspections.
3. Do not shake the camera or subject it to hard knocks. The camera may
be damaged if it falls.
4. Ensure that no water or moisture enters the camera. This can cause
short circuits and accidents.
Note
When using the flash, do not look directly into it, as this can damage the
eyes.
11.2 Maintenance and care
Please clean the body, lens and LCD as follows:
Do not use thinning or cleaning agents which contain petrol. This could damage the
camera.
Clean the camera body with a soft cloth.
Lens: First remove dust with a lens brush. Then clean with a soft cloth.
Do not use powerful cleaning agents on the body and lens (contact your dealer if dirt
cannot be removed).
Do not apply pressure to the LCD or use hard objects to clean it.
11.3 Photo tips
For excellent photographs, please observe the following tips:
Do not move the camera quickly to prevent the photos being out of focus. Hold the
camera steady when pressing the shutter release. Do not move the camera immediately
after pressing the shutter release. Wait until you hear the sound signal before moving
the camera.
Look at the subject through the viewfinder before pressing the shutter release.
Check the angle if the subject is backlit. Move to the side to reduce the backlighting.
In dark conditions, the flash or manual exposure setting should be used.