![](http://pdfasset.owneriq.net/3/ff/3ff58c22-c3c6-40cb-8eef-248bb15ce4d7/3ff58c22-c3c6-40cb-8eef-248bb15ce4d7-bg19.png)
External Sync With No Interlace
3-3
Using the External SYNC Mode
3.2 External Sync With No Interlace
On the rear panel, set switch 5 of mode switch SW3 to OFF.
3.2.1 External Sync Signal Input Conditions
HD signals: 15.734 kHz ± 1% (63.5 µs ± 1%)
VD signals: 244 ~ 1021 H, (see Notes 1, and 2)
Phase
Figure 3–2. External Sync With No Interlace
HD
VD
6 H
2 4 4 ~ 1 0 2 1 H
Notes: 1) The sync becomes internal sync if the VD does not come above 1022H.
2) VD does not receive 0~243H