Texas Instruments MC-780PIx Security Camera User Manual


 
Optical Elements and Other Specifications
7-3
Specifications
7.2 Optical Elements and Other Specifications
Table 7–3 lists other specifications common to the two cameras.
Table 7–3.Optical Elements and Other Specifications
Item Specification
Lens Mount C-mount
Flange back 17.526 mm (can be fine adjusted)
Synchronization System Internal/External
Sync Input/Output HD/VD (signal level:TTL level)
Jitter Within ±60 nsec
Scanning Method 2:1 interlace/non-interlace
Image Output 1.0 V p-p, Sync negative, 75 unbalanced
Horizontal Resolution More than 565 lines
Illumination 0.8 Lux (fixed gain, see Note 1)
Minimum Illumination 0.1 Lux (maximum gain, see Note 1)
S/N Ratio MC–780PIA: over 53 dB
MC–780PIH: over 55 dB
Gain Auto gain adjust/fixed gain/variable gain
gamma Characteristics gamma = 1/0.45
White Clip 120IRE±15IRE
Shutter Modes Continuous shutter/random shutter/VI-mode shutter
Shutter Speeds 1/500, 1/750, 1/1000, 1/1500, 1/2000, 1/3000. 1/4000, 1/8000
Power Source 12 V (range 10.5 V to 15 V)
Power Consumption Approximately 4.2 W
Operating Temperature 0–40°C
Operating Humidity 20–80% (There must be no dew formation.)
Maintenance Temperature –20°C to +60°C
Maintenance Humidity 20–95% (There must be no dew formation.)
Oscillation 4.4 G (11–100 Hz)
Exterior Dimensions
44(W) 48(H) 112(D) mm (includes protruding section)
Weight 215 g
Accessories Focus Ring Cap (1)
User’s Manual (1)
AC Adaptor Japan Local Model (PS-78012J)
1) Illumination measured with Davitson Optronics Optoliner.
2) These specifications may change without notice due to improvements.