Filter
Top Products
4-2 Operator's Manual LDK 100 Camera Head Location of Controls and Functions
LDK 100 Series
Security and Access
Smart card slot
Insert your smart card into this slot with the chip on the
card facing the front of the camera. Push the card
home until it fits snugly.
There are two types of card; an owner card and a user
card. Both cards store operator files and scene files.
The owner card can be used to change the user level
of the camera. The user level determines which set of
controls and functions can be changed by the camera
operator. Refer to Section 6 for more information on
the smart card.
A smart card is not required for normal operation of
the camera.
Note
Only use an original Thomson camera card.
Store the owner card in a safe place.
bts1311
Power Supply
Power switch
The power switch has two positions:
On : Power to camera is switched on.
Off : Power to camera is switched off.
When you switch off the power, the access rights that
were obtained by the use of the PIN code are disabled
and the camera starts at the assigned user level when
switched on again.
1
1
1 1