Filter
Top Products
Location of Controls and Functions Operator's Manual LDK 100 Camera Head 4-7
Viewfinder
Zebra switch
This switch disables (OFF position) or enables the
zebra pattern in the viewfinder which indicates high
video levels. Values for the zebra function are selected
in the VF menu. (The zebra pattern is switched off
when the skin view is on.)
Option switch
This switch is included on the viewfinder to allow
future features to be incorporated.
Brightness control
Use this rotary control to adjust the brightness of the
viewfinder display to suit your needs.
Contrast control
Use this rotary control to adjust the contrast of the
viewfinder display to suit your needs.
Crispening control
This rotary control adjusts the sharpness of the picture
displayed in the viewfinder. Reduce the crispening for
a better picture when the gain is set to +++.
Tally switch
The tally switch is used to control the tally indicators
at the front of the viewfinder and at the rear of the
carrying handle.
When this switch is set to the ON position, the tally
indicators light when the camera is on-air. When this
switch is set to the OFF position, the tally indicators
do not light when the camera is on-air.
Dioptre
The dioptre of the viewfinder can be adjusted to suit
your eyesight by turning the dioptre ring. The range of
the dioptre is +3 to -3.
1
1
2
2
3
3
4
4
5
5
6
6
7
7