Filter
Top Products
16
- English
Connecting & Setting UP
Method 2 : Antenna +
VCR/satellite receiver/cable box
+ DVD Recorder + TV
Before making or changing any rear panel connections,
make sure that all components are switched off and
unplugged from the wall outlet.
1. Connect the cable from the antenna/cable TV outlet
to the antenna input on your VCR/satellite
receiver/cable box.
2. Connect the antenna output of your VCR/satellite
receiver/cable box to the ANTENNA IN of DVD
Recorder using antenna cable.
3. Use another RF antenna cable to connect the
ANTENNA OUT of DVD Recorder to the antenna
input on your TV.
4. Connect the AV1 connector on DVD Recorder to the
SCART AV connector on TV using a SCART cable.
5. Connect the AV2 connector to a SCART AV
connector on VCR/satellite receiver/cable box.
6. Setup “AV1 Out option” using on-screen menu.
Refer to page 29.
4
5
1
2
3
external device
(VCR/satellite receiver/cable box)
Method 1 : Antenna + DVD
Recorder + TV
You can connect your DVD Recorder to the television
using the SCART cable if the appropriate input is
available on the television. You thus:
● Obtain better quality sound and pictures
● Simplify the setting up procedure of your DVD
Recorder
1. Connect the RF cable as shown.
2. Connect one end of the SCART cable to the AV1
socket on the rear of the DVD Recorder.
3. Plug the other end into the appropriate connector
on the television.
2
3
■
Regardless of the type of connection
chosen, you must always connect the RF
cable supplied. Otherwise, no
picture will be visible on the screen when
the DVD Recorder is switched off.
■
Make sure that both the television and the
DVD Recorder is switched off before
connecting the cables.
■
If you want to record one channel while
watching another channel on TV screen,
press TV/DVD button.
NOTE
00566A-D-R3_14~35 8/31/04 10:28 AM Page 16