Filter
Top Products
6
4. SETTING
4-1. Video Scanning Modes
This camera has two types of video signal scanning modes. Select the mode with the partial
scanning switch (MODE SELECT switch bit 9) located and the setting of Pin 9 (PART input) of
the 12-pin connector on the rear panel of the camera.
Partial Scanning OFF (All pixels scanning)
In this mode, all pixels independent signal from the VIDEO OUT connector is output each 1/60
second (Line order output).
External HD/VD sync is permitted.
ON OFF
EXT
INT
HD/VD
75Ω
SHT
TRG
M.G
MIN MAX
M GAIN
VIDEO OUT
DC IN/SYNC
P.S
1
O
N
2
3
4
9
OFF ON
5
6
7
8
9
0
9
Rear MODE SELECT Switch
Partial scanning
Frame image
1/60s (525H)
Frame image Frame image
Bit 9
OFF
ON
ON
Pin 9 of the 12-pin connec-
tor on the rear panel
*1
L
H or OPEN
Mode
Partial scanning OFF
Partial scanning OFF
Partial scanning ON
*1: Either H or L is permitted.